CyberLink Logo

How to Batch Edit Photos in PhotoDirector

Make the same edits to a whole set of photos at once.

Updated Nov. 9, 2026 · 5 min read

PhotoDirector's Batch Editor applies an edit to every photo you've loaded. Use it to give team headshots or another set of photos the same shape, background, and look without opening each picture in turn.

BEFORE
Ten portraits in the Batch Editor grid, each a different shape and background
Ten photos, each a different shape and background.
AFTER
The same 10 portraits, all square on a blue background
The same set after one crop, one background, and one enhancement.
⚡ Quick Answer: How to Batch Edit Photos in 4 Steps
  1. Click Batch Editor at the top of PhotoDirector.
  2. Add your photos with the folder button.
  3. Pick a tool from the list on the left, set it up, and click Apply. Run more tools the same way to stack the edits.
  4. Click Export at the top of the grid, choose a folder, and click Export again.

Steps to Batch Edit Photos in PhotoDirector

Step 1: Open the Batch Editor

Click Batch Editor at the top of the main window, beside Library & Adjust, Guided & GenAI, and Design.

The PhotoDirector main window with an empty canvas and the Batch Editor tab highlighted at the top
Batch Editor is the last tab at the top of the window.

Step 2: Add Your Photos

Click the folder button at the top left of the grid, or Import Photos/Folder in the middle of an empty grid. Then choose Select Photos to pick files, Select Folder to add every photo in a folder, or Select from Library for photos already in PhotoDirector.

The empty Batch Editor grid with the folder button highlighted, and Import Photos/Folder highlighted with its menu open: Select Photos, Select Folder, and Select from Library
Three ways to add photos to the batch.

The count at the bottom confirms how many are loaded. To take photos out of the batch, select them and click Remove at the top right of the grid. The button stays gray until you select a photo. To clear the whole grid, click Remove All next to it.

To turn or flip only some photos, select them and use the four buttons at the top center. They rotate left or right and flip horizontally or vertically. The change happens right away, without Apply.

The Batch Editor grid with one photo selected, and the rotate and flip buttons and the Remove and Remove All buttons highlighted at the top
Rotate, flip, or remove just the photos you select.

Step 3: Pick a Tool

Pick a tool from the list on the left, and it runs over every photo in the grid. Only one tool runs at a time, and each one works on the result of the one before, so the edits stack.

ToolWhat it does for you
Crop/Rotate/FlipGives every photo the same shape and direction, such as a 1:1 square for profile pictures.
Background Remove/ReplaceCuts out the subjects and puts one background behind all of them, so a set of headshots or products matches.
Image EnhancerMakes the photos clearer, with optional Auto tone and Auto color enhancement to even out light and color.
DenoiseCleans up the grain in photos shot in low light.
DeblurSharpens photos that came out soft or shaky.
Filter (Color LUT)Gives the photos one color style, so they look like a series.
Image UpscalerRaises the resolution, so small photos stay sharp when you print them or show them large.
ResizeChanges the dimensions, for example to fit a website's size limit.
The list of eight batch tools on the left of the Batch Editor
Eight tools, each applied to every photo.

While a tool is open, double-click a photo to see it large. Use the arrows at the sides to move through the set, and the buttons at the bottom left to compare before and after. To go back, click the grid button at the top left.

A large preview of the second portrait in the Batch Editor, with the grid button, the arrows at both sides, and the view buttons at the bottom left highlighted
Double-click a photo for a closer look.

The example below stacks three tools on 10 headshots. It crops them square, gives them one background, and then enhances them. The settings for the other five tools come after it.

Crop/Rotate/Flip

Open Crop/Rotate/Flip. The buttons at the top rotate the photos left or right and flip them horizontally or vertically. The Aspect Ratio grid sets the shape, from Original to 21:9. For a ratio of your own, use Custom next to Original. To crop the set for one platform, pick a template under Social Media or Marketplace, below the ratios. The templates fit social posts, covers, and thumbnails, as well as online store listings.

Pick a ratio and a flip, such as 1:1 and Horizontal, and a crop frame appears on every photo at once. Click Apply.

The 1:1 ratio and the Horizontal flip highlighted, with crop frames on every photo
One ratio, set once and cropped on all 10.

When it finishes, a dialog asks whether to export the photos. Choose No to keep going with the next tool, and the cropped set stays in the grid.

All 10 photos cropped square and mirrored in the Batch Editor grid
The set after Apply, square and mirrored.

Background Remove/Replace

Open Background Remove/Replace. PhotoDirector cuts out the subjects as soon as the panel opens, and a spinner shows on each photo while it works. Then choose what goes behind them: Transparent, Blur, Solid Color, or Import Photo.

For a plain color, pick a Solid Color swatch, such as light blue, and the grid previews it as each photo finishes. Click Apply, and answer No to the export prompt to stay in the editor with the new backgrounds.

The four background options and the light blue swatch highlighted in Background Remove/Replace
A plain color gives a set of headshots a common look.

Blur keeps each photo's own background and blurs it. Drag the Blur Background slider to set how much, and keep Feather effect for object's edge checked for a softer edge around the subject.

The Blur option in Background Remove/Replace, with the Blur Background slider and the Feather effect for object's edge checkbox highlighted
Blur keeps each background but softens it.

Import Photo puts a picture behind the subjects. Click one of the built-in backgrounds, sorted into groups such as Christmas, Vintage, and Sky. Or click Import Background to use a photo of your own.

The Import Photo option in Background Remove/Replace, with the Import Background button and the built-in backgrounds highlighted
Built-in backgrounds, or a photo of your own.

Image Enhancer

Open Image Enhancer. Under For further enhancement, turn on Auto tone and Auto color enhancement, and set the strength slider under each.

Choose the folder for the enhanced photos, leave Add photos to the library checked if you want them in PhotoDirector too, and click Apply. A dialog reminds you that Image Enhancer needs an Internet connection.

Auto tone and Auto color enhancement switched on in the Image Enhancer panel
The enhanced photos are saved to the folder you pick.

Denoise and Deblur

Open Denoise or Deblur. Each has one Strength slider, set to 50 at first. Drag it for a lighter or stronger fix, then click Apply.

The Denoise panel with its Strength slider and the Apply button highlighted
Denoise: one Strength slider, then Apply.
The Deblur panel with its Strength slider and the Apply button highlighted
Deblur works the same way.

Filter (Color LUT)

Open Filter (Color LUT) and click a LUT in the list under Default, such as Cool Retro. Strength at the top and Apply at the bottom stay gray until you pick one. Set the strength, then click Apply.

The Filter (Color LUT) panel with Cool Retro picked under Default, and the Strength slider at 100 and the Apply and Clear buttons highlighted
Pick a LUT first, and Strength and Apply turn on.

Image Upscaler

Open Image Upscaler and pick 2X, 3X, or 4X. Under each photo, the grid shows its current size and the size it will become. Then click Apply.

The Image Upscaler panel with the 2X, 3X, and 4X buttons and the Apply button highlighted, and the size line under the first photo highlighted
Each photo shows its size before and after.

Resize

Open Resize and choose how to set the new size. By percentage scales every photo with a slider. By pixels sets a Width or a Height, which suits a website's size limit. Check the new sizes under the photos, then click Apply.

The Resize panel with By percentage and By pixels and the Apply button highlighted, and the size line under the first photo highlighted
By percentage or by pixels, with the new sizes shown.

Step 4: Export the Photos

When the set looks right, click Export at the top of the grid to save every photo at once. PhotoDirector saves them as new image files, so your originals stay as they were. For the file types you can save, see PhotoDirector's supported file formats.

The Batch Editor grid with 10 square photos on a light blue background and the Export button highlighted at the top
Export saves the whole set.

The Photo Export window opens. Next to Export Destination, click the three-dot button to choose the folder for the photos. Leave Add exported photos to the library checked if you want them in PhotoDirector too.

Under Naming, keep Original filename, or choose Custom filename - Sequence number to give the set one name and a number each.

The Photo Export window with the Export Destination folder, the Add exported photos to the library checkbox, and the open Naming menu highlighted
Choose the folder and how the files are named.

For a custom name, type it in Custom name and set the Start number. The Example line shows how the files will be named. Then click Export at the bottom of the window.

The Custom name, Start number, and Example fields highlighted in the Photo Export window, with the Export button highlighted
The Example line previews the new file names.

We tested these steps in PhotoDirector 365 version 18.0.10 on Windows.

Don't have PhotoDirector yet? Give a whole folder of photos the same crop, background, and finish in a single pass.

Download PhotoDirector Free →

FAQ About the Batch Editor

Yes. Each tool works on what the previous one produced, so you can crop, replace the background, and enhance the same set without reloading it.

Not with every tool. Crop/Rotate/Flip and Background Remove/Replace each end with a prompt offering to export. Answer No, and the edited set stays in the grid for the next tool. Image Enhancer works differently: it saves straight to the folder you pick.

Every photo uses the same aspect ratio, but the crop frame lands in a different place on each one. Look over the frames in the grid before you click Apply. To have PhotoDirector place each frame for you, check Auto detect prominent object above Aspect Ratio. PhotoDirector then finds the person or object in each photo and crops around it.