CyberLink Logo

How to Adjust Volume, Remove Noise, and Balance Audio in PowerDirector

Fix levels, clean up a noisy recording, and keep the music from burying the dialogue.

Updated Oct. 29, 2026 · 6 min read

Check your audio before every export. In PowerDirector, Normalize evens out levels across clips, while four AI tools clean up noise, wind, and echo. Audio Ducking lowers the music when someone speaks.

⚡ Quick Answer: Which Tool for Which Problem
  1. One clip too loud or too quiet: drag the white line on its audio track.
  2. Volume that should change partway through a clip: hold Ctrl and click the line to add keyframes.
  3. Clips that do not match each other: the Audio Mixer button at the top left of the timeline > Normalize.
  4. Noise, wind, or echo: Audio tab > Enhance. Pick Speech Enhancement for traffic, AI Audio Denoise for hum and clicks, AI Wind Removal for wind, or AI DeReverb for echo.
  5. Music that's the wrong length: Audio tab > Tools > Smart Fit for Duration.
  6. Music over dialogue: Audio tab > Tools > Audio Ducking.

Prefer to watch? This 5.5-minute video covers volume, Normalize, AI Audio Denoise, Smart Fit, and Audio Ducking.


Adjust the Volume

Change the Volume of One Clip

You can adjust a clip's volume directly on the timeline. Click the clip, hover the white line running along its audio track, and drag it up or down.

The white volume line boxed across an audio clip's audio track on the PowerDirector timeline as it is dragged.
The white line is the clip's volume.

To put the volume back where it started, right-click the clip and choose Reset Volume Level.

The right-click menu on a PowerDirector timeline clip with Reset Volume Level boxed.
The volume returns to exactly where it started.

For fades, double-click the clip, open the Audio tab, and choose Volume / Fade under Tools.

PowerDirector's editing panel with the Audio tab, Volume / Fade under Tools, and the Fade-in and Fade-out sliders boxed.
Audio tab, Tools, Volume / Fade, then the fade sliders.

Then drag the Fade-in and Fade-out sliders at the bottom of the panel to fade the audio in or out.

Volume That Changes Mid-Clip

To bring the level up from a particular moment, hold Ctrl and click the volume line to drop a keyframe. Put one where the change should start and another where it should finish, then move the second.

Two keyframes boxed on an audio clip's volume line in the PowerDirector timeline, between callouts reading Start and End.
One keyframe where the change starts, one where it ends.

To remove one, hold Ctrl and hover over the keyframe until a trash can icon appears, then click the icon. If keyframes are new to you, the keyframe basics are the same here as they are for picture.

The trash can icon boxed on a volume keyframe in the PowerDirector timeline, next to a callout showing Ctrl held with the mouse.
Hold Ctrl over a keyframe to get the trash can.

Make Clips Match Each Other

Normalize brings clips recorded at different times to the same level.

A PowerDirector title card reading Normalize, over two audio clips labeled too quiet and too loud.
This is the problem Normalize fixes.

Open the Audio Mixer

Click the button at the top left of the timeline to open the Audio Mixer.

The Audio Mixer button boxed at the top left of the PowerDirector timeline.
The Audio Mixer button, top left of the timeline.

Each track gets its own strip, and the strips line up with the timeline tracks in the same order.

The Audio Mixer open in PowerDirector with a volume strip for each track.
One strip per track.

Click Normalize on the Track

Find the track you want and click Normalize at the bottom of its strip.

The Normalize button boxed at the bottom of Track 1's strip in the PowerDirector Audio Mixer.
Normalize sits at the bottom of each strip.

PowerDirector analyzes the audio and brings every clip on that track to a consistent level.

Two audio clips in the PowerDirector timeline after normalizing, with a callout reading volume leveled.
Same track, matched levels.

Normalize needs more than one clip on the track. With a single clip, PowerDirector shows a dialog saying so, because there's nothing to match it against. Put the clips you want leveled on the same track first.

A PowerDirector dialog explaining that normalizing a track requires more than one audio clip on it.
PowerDirector tells you in a dialog.

To adjust the volume of an entire track instead, place the playhead over a clip on that track and drag its volume slider. Every clip on the track changes together.

A single track's volume slider highlighted in the PowerDirector Audio Mixer.
One slider moves the whole track.

Clean Up a Noisy Recording

PowerDirector has four AI tools for a noisy recording, all on the Audio tab under Enhance. Each one targets a different sound problem, so pick the one that matches what you hear.

A PowerDirector preview of a person recording at a desk, with callouts reading unclear audio and background noise.
Unclear audio and background noise.
Sound problemToolWhat it does
A voice over traffic, a crowd, or other street noiseSpeech EnhancementRemoves changing background noise and brings the voice forward.
Hum from a fan or air conditioner, clicks, or distortion, in speech or musicAI Audio DenoiseSuggests fixes for hum, clicks, clipping, pops, and harsh "s" sounds.
Wind gusts on an outdoor recordingAI Wind RemovalRemoves the low rumble of wind hitting the microphone.
A distant, echoey voice from an empty or bare roomAI DeReverbRemoves reverb and echo.

Steps for Every Enhance Tool

Open an Enhance Tool

Select the clip on the timeline and click Edit in the toolbar above it. On the Audio tab, click Enhance and select the tool you need. Then click the button with the same name in the panel next to the list.

Or double-click the clip to open the same panel.

PowerDirector's editing panel with the Edit button, the Audio tab, the Enhance tab, the list of four tools, and the AI Wind Removal button boxed.
Four tools in the Enhance list, each with its own button.

Compare and Apply the Fix

Set the sliders in the window that opens. Each tool's section below explains its sliders. Under Preview, click Fixed or Original and press the play button to hear each version. In Speech Enhancement, click Enhanced instead of Fixed. Adjust the sliders if you need to, then click Apply at the bottom of the window.

PowerDirector renders the fixed audio and puts it on the timeline as a new, purple audio clip in place of the original.

The PowerDirector timeline with the new purple audio clip boxed under the video clip, in place of the original audio.
The fixed audio, as a new purple clip.

Make Speech Clearer

The Speech Enhancement window has two sliders. Speech Strength sets how much enhancement is applied to the voice, and Compensation keeps the result sounding natural. Its Preview switch reads Enhanced instead of Fixed.

This example uses 100% and 20% on a street vlog, where a woman talks over a busy crowd. In the pauses between her words, the crowd noise all but disappeared, and her voice kept its level.

PowerDirector's Speech Enhancement window with the Speech Strength and Compensation sliders, the Enhanced and Original preview switch, and the Apply button boxed.
Speech Strength and Compensation, set to 100% and 20%.
BEFORE · SOUND ON
The original audio, with the crowd behind the voice.
AFTER · SOUND ON
After Speech Enhancement.

Remove Background Noise

In the AI Audio Denoise window, choose Dialogue or Music, since speech and music need different treatment.

The AI Audio Denoise dialog in PowerDirector asking whether the clip is dialogue or music, under a callout reading remove noise.
Tell it what it's listening to.

AI Audio Denoise then analyzes the clip, checks the fixes it needs, and suggests a setting for each slider. Check, uncheck, or adjust any of the six: Click Removal, Clipping Removal, Hum Removal, Plosive Removal, De-essing, and Speech Enhancement.

The AI Audio Denoise window in PowerDirector with its suggested slider settings, the Fixed and Original preview switch, and the Apply button boxed, under a callout reading AI suggested adjustment.
Compare the suggested fix against the original before you apply it.

Remove Wind Noise

The AI Wind Removal window has three sliders:

SliderWhat it controls
Frequency LimitThe highest frequency the removal works on, so higher sounds with no wind in them stay untouched.
Removal StrengthHow much wind noise is removed.
CompensationHow much of the original background sound is rebuilt, so the clip still sounds natural.

This example uses 2000 Hz, 100%, and 20% on a beach recording. The wind and surf between words came out about 15 dB quieter, and the voices kept their level.

PowerDirector's AI Wind Removal window with the Frequency Limit, Removal Strength, and Compensation sliders, the Fixed and Original preview switch, and the Apply button boxed.
Three sliders, set to 2000 Hz, 100%, and 20%.
BEFORE · SOUND ON
The original audio, with wind and surf over the voices.
AFTER · SOUND ON
After AI Wind Removal.

Reduce Room Echo

The AI DeReverb window has two sliders. Removal Strength sets how much reverb is removed, and Compensation keeps the result sounding natural, especially for voices.

This example raises Removal Strength from 50 to 75 and leaves Compensation at 50. The echo tail after the last word fell by about 12 dB.

PowerDirector's AI DeReverb window with the Removal Strength and Compensation sliders, the Fixed and Original preview switch, and the Apply button boxed.
Removal Strength at 75, Compensation at 50.
BEFORE · SOUND ON
The original audio, echoing off bare walls.
AFTER · SOUND ON
After AI DeReverb.

Work with Background Music

Fit Music to the Project Length

Select the music clip and click Edit in the toolbar above the timeline. On the Audio tab, under Tools, click Smart Fit for Duration, which remixes the track to the length you ask for.

The Edit button in the toolbar above the PowerDirector timeline and Smart Fit for Duration in the Audio tab's Tools list, both boxed.
Edit, then Smart Fit for Duration.

In the Adjust Duration window, fit the music to the playhead, to the end of the project, or to a length you type, then click OK.

The Adjust Duration (Smart Fit) window in PowerDirector with its three duration options and the OK button boxed.
Three ways to say how long.

White lines on the remixed clip mark where the remix joined the music back together.

A remixed music clip on the PowerDirector timeline with a white remix line boxed under a callout reading Remix connection point.
A remix connection point.

Or do it on the timeline: hold Shift, take the edge of the music clip, and drag. PowerDirector remixes the music to the new length.

A Shift key callout and a highlighted resize pointer on the edge of a music clip in the PowerDirector timeline.
Shift, then drag the edge.

Lower the Music Under Speech

Audio Ducking detects the speech and lowers the music under every line of dialogue for you.

Select the music clip and click Edit in the toolbar above the timeline. On the Audio tab, under Tools, click Audio Ducking.

The Edit button in the toolbar above the PowerDirector timeline and Audio Ducking in the Audio tab's Tools list, both boxed.
Edit, then Audio Ducking.

The Audio Ducking window has four sliders:

SliderWhat it controls
SensitivityHow readily it decides something is speech.
Ducking levelHow far the music drops.
Fade-out durationHow quickly the music goes down.
Fade-in durationHow quickly the music comes back up.

When the sliders are set, click Apply at the bottom of the window.

The four sliders and the Apply button boxed in PowerDirector's Audio Ducking window.
Set the four sliders, then click Apply.

The Result

In this clip, Audio Ducking lowers the music while the presenter speaks and raises it again in her pauses. Turn your sound on for this one.

The finished clip. Sound on.

We tested these steps in PowerDirector 365 version 24.0.8 on Windows.

Don't have PowerDirector yet? Noise cleanup, level matching, ducking, and fades are all built in.

Download PowerDirector Free →

FAQs

Most likely the track has only one audio clip. PowerDirector shows a dialog explaining that normalizing needs more than one clip on the track, since a single clip has nothing to match against. Put the clips you want leveled on the same track and try again.
Use keyframes. Hold Ctrl and click the white volume line to add a point where the change should begin. Add a second where it should end, then drag the second one. To delete a keyframe, hold Ctrl and hover it until a trash can icon appears, then click.
Normalize analyzes the clips and brings them to a consistent level with each other, so it fixes mismatch. The track slider moves everything on the track by the same amount, so it changes the overall level and keeps any mismatch exactly as it was.